Skip to Content
New: meet Clu, and send email, LinkedIn and call steps with Sequences. Watch the videos →
GuidesAttio
👤

Who this is for: self-serve plans (Free, Starter, Pro, Enterprise). Attio needs Pro, Enterprise or the Pro trial. AppSumo customers get Attio on every tier; see the AppSumo documentation for the rest of the deal. Support agent: confirm whether the user is self-serve or AppSumo before giving plan-specific advice.

TL;DR: An Attio workspace admin clicks + on the Attio card in Integrations → CRM integrations and approves access in Attio. Then every lead list and Find People result shows an Attio status column, you can sync people and companies to Attio (people match on email, then LinkedIn URL; companies on domain), plays can start from Attio records, lists and deals and write fields, notes, tasks and list entries back, and Clu can read your Attio people, companies and deals. Writes happen only when you sync or a play you turned on runs. Disconnect from the card’s ⋯ menu.

Attio

Attio  is a CRM. Connect it once and CluGTM can tell you who is already in Attio, send people and companies you find and enrich into it, run plays that start and end in Attio, and answer questions about your Attio data in Clu.

Before you start

  • Plan: Pro, Enterprise, the Pro trial or any AppSumo tier. See Plans.
  • Who connects: someone signed in to Attio as a workspace admin. Attio gives workspace-wide access only to an admin.
  • One connection per organization: one member connects Attio for the whole CluGTM organization, and everyone in it uses that connection.

Connect Attio

Open Integrations

In CluGTM, click Integrations in the sidebar. Attio is under CRM integrations.

Click +

Click the + on the Attio card. Attio opens; sign in if you aren’t already.

Pick the workspace and approve access

Choose the Attio workspace to connect, review the access CluGTM asks for (listed in What CluGTM can access) and approve it.

Confirm

You land back on Integrations with the message Attio connected. Attio moves to Active connections with a green Connected pill, and the Attio status column appears in your lead lists and Find People right away.

If the message says a workspace admin has to connect Attio, ask an Attio workspace admin to do these steps. If it says Attio isn’t included in your plan, the organization needs Pro, Enterprise or the Pro trial.

What CluGTM can access

CluGTM asks Attio for this access when you connect:

Attio accessLevelWhat CluGTM uses it for
RecordsRead and writeRead people, companies and deals for the status column, play triggers and Clu; create and update the people and companies you sync, and the fields a play updates
Object configurationReadRead your objects and attributes so field mapping and play conditions name them right
List entriesRead and writeRead who is on a list for the “record joins a list” trigger; add people to a list from a play
List configurationReadShow your lists in the play builder and in Clu
User managementReadShow workspace members, so tasks can be assigned and Attio users matched to CluGTM users
NotesRead and writeLog a note on a record from a play or from Clu
TasksRead and writeCreate a follow-up task from a play or from Clu
WebhooksRead and writeRequested at connect. CluGTM doesn’t create webhooks in your workspace today; triggers poll Attio instead

CluGTM writes to Attio only when you sync, when a play you turned on runs a write step, or when you confirm a note or task Clu proposes. Your Attio data is only visible to your own CluGTM organization.

Connected before notes and tasks? Workspaces that connected before CluGTM asked for note and task access keep working; only Log note and Create task stop, with a message saying so. An Attio admin can approve the new access in Attio, or reconnect Attio in CluGTM.

The Attio status column

With Attio connected, each lead list, Find People result and person card shows an Attio column headed by the Attio logo. Each cell says whether that person is already in your Attio workspace, so reps don’t prospect people you already have. Open a cell to see the matched record and a link that opens it in Attio. For a person who isn’t in Attio yet, the cell lets you add them.

Sync people and companies to Attio

Pushing to Attio is free in the web app. There are three ways:

  1. One person: open the Attio status cell of someone who isn’t in Attio and add them.
  2. A whole list: in a lead list, click the Attio logo at the top of the Attio column and confirm Sync to Attio. CluGTM writes every lead in the list and updates records that already exist.
  3. An action column: Actions → Export → Export to CRM, then pick Attio and Add or Update People. It can run automatically on new leads that meet your conditions. See Export to CRM and Send to Sequencer.

What a sync writes: name, email, phone numbers, job title, LinkedIn URL and the person’s company, or the fields in your organization’s Attio mapping. People are linked to their company.

How records are matched

CluGTM looks for an existing record before it creates one, so a sync updates instead of duplicating.

RecordMatched on, in order
PersonTheir Attio record id (when a play already looked them up), then email address, then LinkedIn URL
CompanyIts Attio record id, then domain
  • A company is never matched on its name alone, and one without a domain isn’t created.
  • If two Attio companies share a domain, the match is ambiguous and neither is written.
  • Updating a multi-value attribute, such as email addresses or phone numbers, adds the new value and keeps the ones already there.
  • Blank values are never written.

Attio in plays

A play can start from Attio and write back to it. Plays that use Attio read it on the play’s schedule.

Triggers

TriggerStarts when
A record matchesA person or company matches your conditions on its Attio attributes
All matches each periodOn a schedule, for every record that matches
A field changesA watched attribute changes value (agent plays)
A record joins a listA record is added to an Attio list
A deal changes stageA deal moves into a stage you pick (agent plays)
A deal stallsA deal sits in an open stage too long (agent plays)

A trigger starts from the moment you turn it on, so it doesn’t fire for records you already had, unless you choose to include them.

CRM Action steps on Attio (agent plays). Details are in Play steps.

StepWhat it does
SyncAdds or updates people or companies, matched as above
Look upReads a person or company and the fields you choose, for later steps
Update fieldsWrites attributes on a person, their company or a deal
Log noteAdds a note to the record
Create taskCreates a task, assigned to a member, a round robin, the deal’s owner or nobody
Add to listAdds a person to an Attio list of people

You can also skip people already in Attio in a Find People step, and the Qualification skill checks whether each person is in Attio.

Not on Attio: the job change trigger, Set owner, Add contact role, CRM settings and automatic sync, Import from CRM, Lookup in CRM and duplicate cleanup. Those are HubSpot and Salesforce only.

What Clu can see in Attio

Clu reads your Attio workspace through the connection. Reads are free and never write.

  • People, companies and deals: search them, open one, or read a company with its people and deals.
  • Who is already in Attio: for example, “Who at Globex is already in our Attio?”
  • Workspace members, and your fields, lists and deal stages, so it uses the right names.

Clu can also create one Attio note or task for you, but only after you confirm the card it shows. It can’t read meetings, calls or emails from Attio, and since Attio deal stages don’t say which ones are closed, it won’t call a deal won or lost from its stage alone.

Users

The Attio card’s ⋯ menu has Users, where you match each CluGTM user to an Attio workspace member.

Costs

ActionCredits
Connecting AttioFree
Attio status columnFree
Sync one person, Sync to Attio, Export to CRMFree
Clu’s Attio readsFree (Clu’s normal message pricing applies)
Sync to Attio through the public API or MCP0.2 per lead

Disconnect or reconnect

  • Disconnect: in Integrations → Active connections, open the Attio card’s ⋯ menu, choose Disconnect and confirm Remove Connection. An org admin or the member who connected Attio can do this. CluGTM revokes its access token with Attio, the Attio column disappears, and plays stop reading and writing Attio. Records already in Attio stay.
  • Reconnect: disconnect, then connect again with +. Do this to approve new access or to switch to a different Attio workspace.